|
Duct Inserted Type Humidity Sensor |
|
DSD-200-HA |
|
|
|
|
|
- |
Accuracy: Within 5 %RH (at 23 ) |
- |
Response characteristics: Approx. 20 seconds (at 2 m/s wind velocity) |
- |
Sensor can be inserted up to the desired length using the resin bracket. |
- Dimensions
- Spec
- Terminal Arrangement
(Discontinued) |
|
|
|
|
Rating |
Measurement range |
5 to 95 %RH |
Output |
4 to 20 mA DC (Linear conversion corresponding to 0 to 100 %RH)
Max allowable load: 1 k max. |
Supply voltage |
24 V AC/DC 20 % 50/60 Hz |
|
|
General Structure |
Mounting |
Duct inserted, and fixed with the resin bracket. |
|
|
Performance |
Accuracy |
Within 5 %RH (at 23 ) |
Response characteristics |
Approx. 20 seconds (at 2 m/s wind velocity) |
|
|
Other |
Power consumption |
Approx. 1 VA (for 24 V AC)
Approx.
1 W (for 24 V DC) |
Operating environment |
Temperature: -25 to 70
Humidity: Less than 95 %RH (non-condensing)
(Operating environment temperature:
Up to 50 : Less than 95 %RH,
50 to 70 : 70 %RH) |
Storage environment |
Temperature: -25 to 70
Humidity: Less than 95 %RH (non-condensing)
(Operating environment temperature:
Up to 50 : Less than 95 %RH,
50 to 70 : 70 %RH) |
Weight |
Approx. 170 g (Including resin bracket) |
Accessories included |
Mounting screw: 4 pieces,
Resin bracket: 1 piece,
Packing: 1 piece,
Current/Voltage conversion resistor (RES-S06-250): 1 piece,
Cable grand (OA-W1608E): 1 piece,
Instruction manual: 1 copy |
Environmental specification |
RoHS directive conformance |
|
|
|
|
When using 1 to 5 V DC output, connect the provided Current/Voltage conversion resistor
(RES-S06-250)
between Out - Gnd. |
|
|
|