|
Console software
|
| Software
name |
Applicable
model |
Capacity |
ACD-1xA, ACR-1xA console software
SWS-AC001M_V108 2023.02.13
Be sure to install
the Configuration Editor using the "setup.exe".
If SWS-AC001M_V107.msi is used, installation may not finish successfully.
Required when using USB communication cable (CMB-001). |
ACD-13A, ACR-13A
ACD-15A, ACR-15A |
3.5 MB |
ACS-13A console software
SWS-ACS01M_V301 2023.02.13
Required when using USB communication cable (CMA). |
ACS-13A |
10.9 MB |
BCx2 series console software
SWC-BCx01M_V105 2016.05.09
Required when using USB communication cable (CMD-001). |
BCx2 series |
61.7 MB |
PCA1 console software
SWC-PCA101M_V100 2019.12.24
Required when using USB communication cable (CMB-001). |
PCA1 |
61.1 MB |
PCB1 console software
SWC-PCB101M_V102 2022.08.08
Required when using USB communication cable (CMD-001). |
PCB1 |
56.7 MB |
QTC1 console software
SWC-QTC101M_V203 2021.08.26
Required when using USB communication cable [USB-micro USB Type-B(commercial item)]. |
QTC1-2
QTC1-4 |
133.4 MB |
QMC1 console software
SWC-QMC101M_V105 2023.11.14
Required when using USB communication cable [USB-micro USB Type-B(commercial item)]. |
QMC1-Cx
QMC1-MT |
62.1 MB |
SAAP, SAVP console software
SWS-SAx02M_V104 2023.02.13
Required when using USB communication cable (CMS-001).
|
SAAP, SAVP |
6.8 MB
|
SE series console software
SWS-SE001M_V106
Required when using USB communication cable (CMB-001). |
SE series |
29.1 MB |
SG, SH series console software
SWC-SGSH01M_V203 2020.01.06
Required when using USB communication cable (CME-001). |
SG, SH series |
58.2 MB |
SIF-600 console software
SWC-SIF01M_V105 2023.05.26
BCx2 series difference file 2017.08.03
How
to add BCx2 series difference file
(723 MB)
Required when using USB communication cable (CMB-001).
|
SIF-600 |
28.5 MB |
WCL-13A console software
SWS-WCL01M_V117 2019.12.20
Required when using USB communication cable (CMB-001). |
WCL-13A |
40.1 MB
|