Signal Conditioner SG series/SH series | Shinko Technos for temperature and humidity control

취급제품

고객지원/다운로드

회사소개

문의

일본어

영어

HOME

취급제품

온도제어 관련・주변기기

지시조절계・온도조절계
프로그램 컨트롤러

Signal Conditioner
SG series, SH series

- A Wide Range of Lineup - Selectable depending on the usage and function.

- Features Common to All series

- List of models

(SH series: 2024.8.30 Discontinued)

A Wide Range of Lineup - Selectable depending on the usage and function.

Series

Features

Model

Multi Series

Flagship model
Pursuit of multi-functions and usability

SG series

White LED

Air-Conditioning
Control Series

Models for air-conditioning control
Products necessary for air-conditioning control are lined up in the Multi series.

Alarm Series

Alarm setters
2-outputs and 4-outputs are available.

Link Series

Model equipped with serial communication
Models with Modbus RTU are lined up in the Multi series.

Standard Series

Standard model
Simple products with no indication display are lined up.

SH series

No indication

Transducer(SC series)

Accessories

Features Common to All series

	White LED（Multi, Air-Conditioning Control, Alarm, Link series）
	The industry's first! Built-in white LED liquid crystal 11-segments display (Alphanumeric characters can be used.) Mounted in a dark panel, the display is easily seen.

PC setting possible

All products can be set by the computer (loader terminal equipped).
Being connected to a computer through a special cable (sold separately), this product starts up via USB bus power, and simplifies making setting changes. Exclusive Setting Software is available. The software can be downloaded from Shinko website for free.

Special cable (sold separately) and Setting Software

Connecting the SG, SH series to a PC using the tool cable (sold separately)

Compatible design

-	Depth is shortened by 15 mm. (compared to market standard)
-	Sufficient load resistance：Output impedance 750 Ω for both 1-output and 2-outputs
-	Built-in shunt resistor or externally mounted shunt resistor is selectable.
-	2-wire transmitter (sensors, etc. equipped with HART communication) can be connected.

Options

-	Multi-rotation trimmer	:Allowance of adjustment width enables fine adjustment.
-	Coatings are available	:This can be used when environmental countermeasures need to be taken.

	Worldwide power supply
	All products support 85 to 264 V AC. 24 V AC/DC is available for the following models: SGI, SGS, SGD, SGM, SGT, SGR, SGP, SGU, SGL, SGB, SGC

	Close contact mounting
	All products can be mounted in close contact.

	Display pattern（Multi, Air-Conditioning Control, Alarm, Link series）
	9 display patterns are available. Auto lights-out is also available.

	Multifunctional（Multi, Air-Conditioning Control, Alarm, Link series）
	Startup adjustment function (manual mode), display lock function, custom display (8 digits for upper and lower display) are provided.

List of models

Multi Series	Air-Conditioning Control Series	Alarm Series	Link Series
Standard Series	Accessories

Multi Series

Name	Model	Input Type	Output Type	Spec Sheet Manual Dimensions
Isolator (1-output) 2019.06.24	SGI	4 to 20mA 1 to 5V	4 to 20mA 1 to 5V	Spec sheet Manual Dimensions Dimensions(DXF)
Isolator (2-outputs) 2019.06.24	SGIW	4 to 20mA 1 to 5V	4 to 20mA 1 to 5V	Manual Dimensions Dimensions(DXF)
DC signal transmitter (1-output) 2019.06.24	SGS	Current, voltage input	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
DC signal transmitter (2-outputs) 2019.06.24	SGSW	Current, voltage input	Current, voltage output	Manual Dimensions Dimensions(DXF)
Current loop supply (1-output) 2019.06.24	SGD	4 to 20mA	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Current loop supply (2-outputs) 2019.06.24	SGDW	4 to 20mA	Current, voltage output	Manual Dimensions Dimensions(DXF)
Current loop supply with ratio setting (1-output) 2019.06.24	SGM	4 to 20mA	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Current loop supply with ratio setting (2-outputs) 2019.06.24	SGMW	4 to 20mA	Current, voltage output	Manual Dimensions Dimensions(DXF)
Thermocouple transmitter (1-output) 2019.06.24	SGT	Thermocouple	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Thermocouple transmitter (2-outputs) 2019.06.24	SGTW	Thermocouple	Current, voltage output	Manual Dimensions Dimensions(DXF)
RTD transmitter (1-output) 2019.06.24	SGR	RTD	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
RTD transmitter (2-outputs) 2019.06.24	SGRW	RTD	Current, voltage output	Manual Dimensions Dimensions(DXF)
Potentiometer transmitter (1-output) 2019.06.24	SGP	Potentiometer	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Potentiometer transmitter (2-outputs) 2019.06.24	SGPW	Potentiometer	Current, voltage output	Manual Dimensions Dimensions(DXF)
Universal transmitter (1-output) 2019.06.24	SGU	Current, voltage, Thermocouple RTD	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Universal transmitter (2-outputs) 2019.06.24	SGUW	Current, voltage, Thermocouple RTD	Current, voltage output	Manual Dimensions Dimensions(DXF)
Linearizer (1-output) 2019.06.24	SGL	Current, voltage	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Multi pulse transmitter (1-output) 2024.03.14	SGF	Pulse input	Various pulse outputs	Manual Dimensions Dimensions(DXF)
Multi pulse transmitter (2-outputs) 2024.03.14	SGFW	Pulse input	Various pulse outputs	Manual Dimensions Dimensions(DXF)
Pulse-Analog transmitter (1-output) 2024.03.14	SGJ	Pulse input	Current, voltage output	Manual Dimensions Dimensions(DXF)
Pulse-Analog transmitter (2-outputs) 2024.03.14	SGJW	Pulse input	Current, voltage output	Manual Dimensions Dimensions(DXF)
Differential transmitter (1-output) 2019.06.24	SGQ	Thermocouple RTD	Current, voltage output	Manual Dimensions Dimensions(DXF)
2-input math function transmitter (1-output) 2019.06.24	SGZ	Current, voltage,	Current, voltage output	Manual Dimensions Dimensions(DXF)

To 24 V Pulse Transmitter (SAFx series)

Air-Conditioning Control Series

Name	Model	Input Type	Output Type	Spec sheet manual Dimensions
High/Low selector (1-output) 2019.06.24	SGH	Current, voltage,	Current, voltage output	Manual Dimensions Dimensions(DXF)
Ratio, Bias (Ratio transmitter) (1-output) 2019.06.24	SGB	Current, voltage,	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Ratio, Bias (Ratio transmitter) (2-outputs) 2019.06.24	SGBW	Current, voltage,	Current, voltage output	Manual Dimensions Dimensions(DXF)
Split-Range transmitter (2-outputs) 2019.06.24	SGXW	Current, voltage,	Current, voltage output	Manual Dimensions Dimensions(DXF)
Limiter (1-output) 2019.06.24	SGC	Current, voltage,	Current, voltage output	Spec sheet Manual Dimensions Dimensions(DXF)
Limiter (2-outputs) 2019.06.24	SGCW	Current, voltage,	Current, voltage output	Manual Dimensions Dimensions(DXF)

Alarm Series

Name	Model	Input Type	Output Type	Spec sheet manual Dimensions
Instrumentation signal input Alarm setter (4 to 20mA, 1 to 5V only) (2-outputs) 2019.06.24	SGAL	4 to 20mA 1 to 5V	Relay output a or b contact selectable	Manual Dimensions Dimensions(DXF)
Instrumentation signal input Alarm setter (4 to 20mA, 1 to 5V only) (4-outputs) 2019.06.24	SGAL	4 to 20mA 1 to 5V	Relay output a or b contact selectable	Manual Dimensions Dimensions(DXF)
Universal input Alarm setter (2-outputs) 2019.06.24	SGAU	Current, voltage, Thermocouple RTD	Relay output a or b contact selectable	Manual Dimensions Dimensions(DXF)
Universal input Alarm setter (4-outputs) 2019.06.24	SGAU	Current, voltage, Thermocouple RTD	Relay output a or b contact selectable	Manual Dimensions Dimensions(DXF)

To 24 V Alarm Detector (SAxA series)

Link Series

Name	Model	Input Type	Output Type	Spec sheet manual Dimensions
Isolator (1-output) 2019.06.24	SGIL	4 to 20mA 1 to 5V	4 to 20mA 1 to 5V	Spec sheet Manual Communication Dimensions Dimensions(DXF)
DC signal transmitter (1-output) 2019.06.24	SGSL	Current, voltage,	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Current loop supply (1-output) 2019.06.24	SGDL	4 to 20mA	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Current loop supply with ratio setting (1-output) 2019.06.24	SGML	4 to 20mA	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Thermocoupletransmitter (1-output) 2019.06.24	SGTL	Thermocouple	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
RTDtransmitter (1-output) 2019.06.24	SGRL	RTD	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Potentiometertransmitter (1-output) 2019.06.24	SGPL	Potentiometer	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Universal transmitter (1-output) 2019.06.24	SGUL	Current, voltage, Thermocouple RTD	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Linearizer (1-output) 2019.06.24	SGLL	Current, voltage,	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Multi pulse transmitter (1-output) 2024.03.14	SGFL	Pulse input	Various pulse outputs	Manual Communication Dimensions Dimensions(DXF)
Pulse-Analog transmitter (1-output) 2024.03.14	SGJL	Pulse input	Current, voltage output	Manual Communication Dimensions Dimensions(DXF)
Ratio, Bias (Ratio transmitter) (1-output) 2019.06.24	SGBL	Current, voltage,	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)
Limiter (1-output) 2019.06.24	SGCL	Current, voltage,	Current, voltage output	Spec sheet Manual Communication Dimensions Dimensions(DXF)

Standard Series

Name	Model	Input Type	Output Type	Spec sheet manual Dimensions
SH series 2024.03.14	SHxx			Manual
Isolator (1-output) 2019.04.26	SHI	4 to 20mA 1 to 5V	4 to 20mA 1 to 5V	Spec sheet Dimensions Dimensions(DXF)
Isolator (2-outputs)	SHIW	4 to 20mA 1 to 5V	4 to 20mA 1 to 5V	Dimensions Dimensions(DXF)
DC signal transmitter (1-output) 2019.04.26	SHS	Current, voltage,	Current, voltage output	Spec sheet Dimensions Dimensions(DXF)
DC signal transmitter (2-outputs)	SHSW	Current, voltage,	Current, voltage output	Dimensions Dimensions(DXF)
Current loop supply (1-output) 2019.04.26	SHD	4 to 20mA	Current, voltage output	Spec sheet Dimensions Dimensions(DXF)
Current loop supply (2-outputs)	SHDW	4 to 20mA	Current, voltage output	Dimensions Dimensions(DXF)
Thermocouple transmitter (1-output) 2019.04.26	SHT	Thermocouple	Current, voltage output	Spec sheet Dimensions Dimensions(DXF)
Thermocouple transmitter (2-outputs)	SHTW	Thermocouple	Current, voltage output	Dimensions Dimensions(DXF)
RTDtransmitter (1-output) 2019.04.26	SHR	RTD	Current, voltage output	Spec sheet Dimensions Dimensions(DXF)
RTDtransmitter (2-outputs)	SHRW	RTD	Current, voltage output	Dimensions Dimensions(DXF)
Potentiometertransmitter (1-output) 2019.04.26	SHP	Potentiometer	Current, voltage output	Spec sheet Dimensions Dimensions(DXF)
Potentiometertransmitter (2-outputs)	SHPW	Potentiometer	Current, voltage output	Dimensions Dimensions(DXF)

Accessories

Name	Model	Spec Sheet Manual Dimensions
Tool Cable	CME-001	Manual Dimensions
Console software	SWC-SGSH01M_V203	Download (58,125KB)
USB driver (ver.2.12.36) USB driver corresponds to 32bit or 64bit OS.	Required when Tool Cable (CME-001) is used.	Download (2,343KB)
Shunt resistor	RES-xxx	Dimensions
Cold junction compensator	CJA	Dimensions
8P socket		Dimensions
11P socket		Dimensions

CE마킹적합품 / UL취득제품 | 생산종료제품

사이트맵 | 이용조건 | 개인정보보호 관련 | 품질 및 환경활동